Clinical Chemistry Analyzer

Home : Products : Instruments

Clinical Chemistry

  • iChem+
  • iChem-120
  • iChem-200
  • CS-T180
  • CS-T240
  • CS-300b
  • CS-400
  • CS-1300b
  • Autolyser
  • Autolyser-450

Features

  • End point, kinetics, fixed time, absorbance and factor
  • 5-inch True Touch Screen and Key Pad
  • Aspiration volume starts from 200 µl
  • Dual Testing mode: Flow cell & Cuvette
  • Double wavelength Testing available
  • Test options: - colorimetric & turbidimetric
  • Real time Reaction Monitoring curve on display screen
  • 15000 Patients storage capability
  • 2000 Plus Parameters can be programmed
  • Calibration Traceable and QC compliance
Semi-automated Clinical Chemistry Analyser

Technical Specifications

Principle Colorimetric & Turbidimetric
Input 5-inch touch screen and keypad
Assay Method
  • End Point
  • Absorbance
  • Factor
  • Kinetics
  • Two-Point Kinetics (Fixed Time)
  • Dual Wavelength
  • Linear and non-linear calibration
Optics
  • Photometric
  • 8 Position filter wheel with Automatic Selection
  • 7 Interference filter – 340, 380, 405, 505, 546, 578, 620 nm
  • 1 Position for optional filter
  • <0.1% Absorbance Repeatability
  • 0.00 to 3.00 Abs Measuring Range
Light Source
  • Tungsten Halogen Lamp, 6V 10W
  • 2000 hours Life Time
Temperature Control
  • By means of Peltier
  • Optional Temperatures – Room temperature, 25, 30, 37±0.3OC
Flowcell
  • Stainless steel with quartz window
  • Measuring volume - 32µl
  • Aspiration Volume: 200µl to 3000µl
Storage
  • Up to 200 test items
  • Up to 15000 test results
Printer Built-in Internal thermal printer
Interface
  • RS-232 serial port supporting data transmission
  • LIS is supported
Power & Environmental Requirements
  • 100 – 240 AC, 50/60 Hz
  • 10-30OC – Working Temperature
  • <85% Relative Humidity
Dimension 355mm(H) x 330mm(W) x 175mm(D)
Net Weight 5.6 Kg

Features

  • Fully automated discrete random access analyser
  • Throughput of up to 150 photometric tests/hour
  • Water consumption: Less than 3.5 L/H
  • 40 positions for samples and reagents respectively, 24-hour non-stop cooling
  • Optional barcode reader and ISE
  • Airtight Static Matrix Optical System (ASMOS), rear spectrophotometry with synchronized double and single wavelength testing
  • Highly polished sample probe with liquid level detection, automatic probe depth adjustment and collision protection
  • Independent mixer, rinsed in vertical style
  • 81 special UV transmitting plastic cuvettes and optional quartz cuvettes
Clinical Chemistry Analyser iChem-150

Technical Specifications

Sample / Reagent System
Sample/Reagent tray 40 positions for sample and reagent respectively in refrigerated compartment (4 – 12OC)
Sample volume 2 - 50µl, step by 0.1µl
Reagent volume
  • R1: 150µl – 500µl, step by 1µl
  • R2: 10µl – 350µl, step by 1µl
Sample/Reagent probe Liquid level detection, automatic probe depth adjustment and collision protection
Sample tube Compatible with blood collection tube, minimal tube, sample cup etc.
Reagent bottle Compatible with various sizes reagent bottles
Reaction System
Cuvette Special ultraviolet transmitting plastic cuvettes and optical length of 5mm
Reaction volume 150µl – 500 µl
Heating Fully sealed constant temperature, heated by solid substance, fast and steady
Reaction Temperature 37±0.1OC
Mixing system Independent mixing probe
Reaction cuvette Disposable
Optical System
Light source 20W/12V halogen lamp, lifetime 2000 hours
Photometric method Airtight Static Matrix Optical System (ASMOS), full-sealed, maintenance free
Wavelength 8 wavelengths: 340, 405, 450, 510, 546, 578, 630 and 670nm, support single/dual wavelength
Absorbance range 0 – 4.00 Abs
Calibration & Control
Calibration mode Linear, Logit-log 4P, Logit-log 5P, Spline, Exponential, Polynomial
Control rule Westgard multi-rule, Cumulative sum check, Twin plot
Operation Unit
Operation system Windows based operating system
Interface RS-232
Others
Power supply AC 100V – 240V, 50Hz/60Hz
Power 300W
Dimension 855mm x 650.5mm x579 mm
Net Weight 80 kg

Features

  • Fully automated discrete random access analyser
  • Throughput of up to 225 photometric tests/hour
  • On-board laundry with 6-step washing function
  • Water consumption: Less than 5.0 L/H
  • 40 positions for samples and reagents respectively, 24-hour non-stop cooling
  • Optional barcode reader and ISE
  • Airtight Static Matrix Optical System (ASMOS), rear spectrophotometry with synchronized double and single wavelength testing
  • Highly polished sample probe with liquid level detection, automatic probe depth adjustment and collision protection
  • Independent mixer, rinsed in vertical style
  • 81 special UV transmitting plastic cuvettes and optional quartz cuvettes
Clinical Chemistry Analyser iChem-150

Technical Specifications

Sample / Reagent System
Sample/Reagent tray 40 positions for sample and reagent respectively in refrigerated compartment (4 – 12OC)
Sample volume 2 - 50µl, step by 0.1µl
Reagent volume
  • R1: 150µl – 500µl, step by 1µl
  • R2: 20µl – 350µl, step by 1µl
Sample/Reagent probe Liquid level detection, automatic probe depth adjustment & collision protection
Sample tube Compatible with blood collection tube, minimal tube, sample cup etc.
Reagent bottle Compatible with various sizes reagent bottles
Reaction System
Cuvette Special ultraviolet transmitting plastic cuvettes and optical length of 5mm
Reaction volume 150µl – 500 µl
Heating Fully sealed constant temperature, heated by solid substance, fast and steady
Reaction Temperature 37±0.1OC
Mixing system Independent mixing probe
Cleaning system On-board laundry with 6-step washing function
Optical System
Light source 20W/12V halogen lamp, lifetime 2000 hours
Photometric method Rear spectrophotometry by filter technology, fully sealed, free from mildew.
Wavelength 8 wavelengths: 340, 405, 450, 510, 546, 578, 630 and 670nm, support single/dual wavelength
Absorbance range 0 – 4.00 Abs
Calibration & Control
Calibration mode Linear, Logit-log 4P, Logit-log 5P, Spline, Exponential, Polynomial
Control rule Westgard multi-rule, Cumulative sum check, Twin plot
Operation Unit
Operation system Windows based operating system
Interface RS-232
Others
Power supply AC 100V – 240V, 50Hz/60Hz
Power 350VA
Dimension 855mm x 640mm x560mm
Net Weight 100 kg

Features

  • Fully automated discrete random access analyser
  • Constant throughput of 180 photometry tests per hour (540 tests per hour with ISE)
  • Sample/reagent disc – 40 standard positions can be increased to 80
  • Whole blood testing function for HbA1c (on board lysis function available) to avoid manual error.
  • 60 nm polished probe with automatic digital liquid level detection, collision protection and clot detection
  • Minimum reaction volume 100 µl, save cost
  • Sensitive and useful bubble detection function
  • One independent flat paddle mixers
  • On-board laundry – 12 steps rinsing system
  • Water degassing technology
  • Rear spectrophotometry of holographic concave flat field grating
  • Maintenance free high precision long life ceramic piston syringe, ensures high precision in sampling.
  • HIS/LIS interface connectivity, remote maintenance support

Technical Specifications

Overall performance
Equipment type Fully automatic, discrete, STAT priority
Analysis rate Colorimetry speed 180 T/H (single/double reagent)
Test principle Colorimetry, turbidimetry
Analysis Method End-point, Kinetic, Fixed time, etc.
Sample Reagent Unit
Sample reagent positions 40 standard can up to 80
Sample cuvettes specification Standard cup, Original blood tube, multi-specification tubes available
Sample/Reagent probe 1, with the function of liquid level detection and collision protection
Sample/Reagent Probe carrying rate Automatic warm water cleaning
Reaction Unit
Reaction Cuvette 56 positions optical plastic cup
Total volume of reaction liquid 100µl – 360µl
Reaction Temperature 37oC
Reaction disk constant temperature Air bath
Mixer 1, after joining reagent, blending immediately
Reaction cuvette cleaning 8 stops 12 steps by warm water rinsing
Optical System
Light source 20W/12V halogen lamp
Monochromator Grating Photometry
Photoelectron road After spectrophotometry
Wavelengths 340nm-800nm
Detector Photodiode LED array
Calibration & QC
Calibration Method 1-point linear method, 2-point linear method, multipoint linear & non-linear method
Calibration tracking Automatic description calibration k-value trends
QC method Real-time QC, daily QC and monthly QC
Out of control processing Alarm for out of control sample
Operating System
PC operating system Windows 7 or Windows 10
Analysis control software Graphical operating software English version
Report printing Report formats support the user-defined mode, QC and state information etc.
System connection TCP/IP network connection, standard RJ-45
Others
Volume 744mm x 703mm x 530mm
Weight 100kg
Power supply Voltage AC 100V-240V, 50/60Hz, power 600VA
Clinical Chemistry Analyser CS-T240

Features

Fully automated bench-top Random Access Clinical Chemistry analyser

  • Throughput of 240 tests / hour photometric tests (single/double reagent)
  • Refrigerated reagent/sample compartment
  • On-board laundry – 12 steps rinsing system
  • Reusable cuvettes
  • Rear spectrophotometry of holographic concave flat field grating
  • Syringes are made of long life high-precision ceramic piston
  • Collision protection, self-resetting probe
  • Daily and monthly QC
  • LIS interface
  • User authority hierarchical management to enhance system security

Technical Specifications

Throughput

  • Constant throughput of 240 photometry tests per hour
Sample Reagent Unit
Sample reagent positions The reagent and sample share one disk, totally 67 positions. Continuously cooling at all positions to keep 5~150C within 24 hrs.
Sample volume 3 - 35 μL with increments of 0.1 μL
Reagent volume R1: 10μl~350μl, R2: 10μl~200μl, 1μl stepping
Sampling technology Liquid level detection and collision protection
Sample tube Standard cups, original blood tube, multi-specification tubes available
Sample reagent probe 1, with function of liquid level detection and collision protection
Sample reagent probe carrying rate automatic warm water cleaning. Carrying rate <1.0%
Automatic sample dilution 2 ~ 115 times
Reaction Unit
Reaction Cuvette 120 positions optical plastic cup, optical diameter is 6mm
Reaction volume 150 μL ~ 550 μL
Reaction disk constant temperature Circulating water
Reaction temp. 37±0.1OC
Mixing needle 1, after joining reagent, blending immediately
Cuvette cleaning system 8 stops 12 steps by warm water rinsing
Optical System
Light source 20W/12V halogen lamp with lifetime of more than 2000 hours
Photometric method Grating Photometry
Wavelength 13 wavelengths 340nm, 380nm, 405nm, 450nm, 480nm, 505nm, 546nm, 570nm, 600nm, 660nm, 700nm, 750nm or 800 nm
Detector Photodiode LED array
Absorbance range 0~3.3Abs
Calibration & Control
Calibration Method 1 point linear method, 2 point linear method, multipoint linear method, non-linear method
Calibration tracking Automatic description calibration k-value trends
QC method real-time QC, days QC and day QC
Operation Unit
Operation system Windows XP
Analysis control software English version graphical operating software
Report printing Report formats support the user-defined mode, QC and state information etc.
Interface TCP/IP network connection, standard RS-232C
Working Conditions
Power supply Voltage AC 220V+22V, 50/60Hz
Power 650VA
Dimension 998mm X 752mm X 517 mm
Net Weight 120 Kg
Clinical Chemistry Analyzer CS-T240
Clinical Chemistry Analyser CS-T240
Clinical Chemistry Analyzers CS-T240

Features

Fully automated Random Access Clinical Chemistry analyser

  • Throughput of 300 tests / hour photometric tests (single/double reagent)
  • 2 stand-alone probes – one probe for sample and one probe for reagent
  • Semiconductor refrigerated reagent discs
  • On-board laundry – 11 steps rinsing system
  • Water degassing technology
  • Flat paddle stirring mechanism
  • Reusable cuvettes
  • Rear spectrophotometry of holographic concave flat field grating
  • Syringes are made of long life high-precision ceramic piston
  • Collision protection, self-resetting probes
  • Daily and monthly QC
  • LIS interface
  • User authority hierarchical management to enhance system security
  • Optional ISE module (Throughput 500 tests/hour with ISE)

Technical Specifications

Throughput

  • Constant throughput of 300 photometry tests per hour (450 tests her hour with ISE)
Sample Unit
Sample tray/positions 115 position（basic sample :50, calibrators:34, emergency sample 20, QC product: 8, detergent:3). Continuously cooling at calibration and QC positions to keep 5 - 150C within 24 hrs.
Sample volume 2 - 35 μL with increments of 0.1 μL
Sampling technology Liquid level detection and collision protection
Sample tube Standard cups, original blood tube, multi-specification tubes available
Sample probe carrying rate automatic warm water cleaning. Carrying rate <1.0%
Automatic sample dilution 3 ~ 170 times
Reagent Unit
Reagent tray/positions Single reagent disk, maximum 67 positions available, continuous 5~150C cooling within 24 hrs”
Reagent volume 20μl ~ 350μl, 1μl stepping
Reagent probe 1, with the function of liquid level detection and collision detection
Reagent probe carrying rate automatic warm water cleaning. Carrying rate <1.0%
Reagent bottle 70 ml, 20 ml or 100 ml standard reagent kit
Reaction Unit
Reaction Cuvette 120 positions optical plastic cup, optical diameter is 6mm
Reaction volume 150 μL ~ 450 μL
Reaction disk constant temperature Circulating water
Reaction temp. 37±0.1oC
Mixing needle 1, after joining reagent, blending immediately
Cuvette cleaning system -
Optical System
Light source 20W/12V halogen lamp with lifetime of more than 2000 hours
Photometric method Grating Photometry
Wavelength 13 wavelengths 340nm, 380nm, 405nm, 450nm, 480nm, 505nm, 546nm, 570nm, 600nm, 660nm, 700nm, 750nm or 800 nm
Detector Photodiode LED array
Absorbance range 0~3.3Abs
Calibration & Control
Calibration Method 1 point linear method, 2 point linear method, multipoint linear method, non-linear method
Calibration tracking Automatic description calibration k-value trends
QC method real-time QC, days QC and day QC
Operation Unit
Operation system Windows XP
Analysis control software English version graphical operating software
Report printing Report formats support the user-defined mode, QC and state information etc.
Interface TCP/IP network connection, standard RS-232C
Working Conditions
Power supply Voltage AC 220V+22V, 50/60HzVoltage AC 220V+22V, 50/60Hz
Power 1.5KVA
Dimension 1060mm X 790mm X 1150 mm
Net Weight 230 Kg
Clinical Chemistry Analyser CS-300b
Clinical Chemistry Analzser CS-300b

Features

Fully automated Random Access Clinical Chemistry analyser

  • Throughput of 400 tests / hour photometric tests (single/double reagent)
  • 3 stand-alone probes – one probe for sample and two probes for reagent
  • Semiconductor refrigerated double reagent discs
  • Cooled positions for calibrators and controls
  • On-board laundry – 12 steps rinsing system
  • Pipetting tube has pressure sensor which can detect and clear clot
  • Water degassing technology
  • Two independent flat paddle mixers
  • Reusable cuvettes
  • Rear spectrophotometry of holographic concave flat field grating
  • Syringes are made of long life high-precision ceramic piston
  • Collision protection, self-resetting probes
  • Upto 4 reagents testing (R1, R2, R3, R4)
  • Daily and monthly QC
  • LIS interface
  • User authority hierarchical management to enhance system security
  • Optional ISE module (Throughput 800 tests/hour with ISE)

Technical Specifications

Throughput

  • Constant throughput of 400 photometry tests per hour (800 tests her hour with ISE)
Sample Unit
Sample tray/positions 115 position（basic sample : 50, calibrators:34, emergency sample 20,QC product: 8, detergent:3. Continuously cooling at calibration and QC positions to keep 5 - 150C within 24 hrs.
Sample volume 2 - 35 μL with increments of 0.1 μL
Sampling technology Liquid level detection, clot detection and collision protection
Sample tube Standard cups, original blood tube, multi-specification tubes available
Sample probe carrying rate automatic warm water cleaning. Carrying rate <1.0%
Automatic sample dilution 3 ~ 170 times
Reagent Unit
Reagent tray/positions Double reagent disk, 45x2, continuous 5 - 150C within 24 hrs.
Reagent volume R1: 20μL ~ 350μL, R2: 20μL ~ 350μL, R3: 20μL ~ 350μL, R4: 20μL ~ 350μL,
Reagent probe 2, with the function of liquid level detection and collision detection
Reagent probe carrying rate automatic warm water cleaning. Carrying rate <1.0%
Reagent bottle 70 ml, 20 ml
Reaction Unit
Reaction Cuvette 120 positions optical plastic cup, optical diameter is 6mm
Reaction volume 150 μL ~ 450 μL
Reaction disk constant temperature Circulating water
Reaction temp. 37±0.1o C
Mixing needle 2, after joining reagent, blending immediately
Cuvette cleaning system 7 stops 11 steps by warm water rinsing
Optical System
Light source Linear, Logit-log 4P, Logit-log 5P, Spline, Exponential, Polynomial
Photometric method Grating Photometry
Wavelength 13 wavelengths 340nm, 380nm, 405nm, 450nm, 480nm, 505nm, 546nm, 570nm, 600nm, 660nm, 700nm, 750nm or 800 nm
Detector Photodiode LED array
Absorbance range 0~3.3Abs
Calibration & Control
Calibration Method 1 point linear method, 2 point linear method, multipoint linear method, non-linear method
Calibration tracking Automatic description calibration k-value trends
QC method real-time QC, days QC and day QC
Operation Unit
Operation system Windows XP
Analysis control software English version graphical operating software
Report printing Report formats support the user-defined mode, QC and state information etc.
Interface TCP/IP network connection, standard RS-232C
Working Conditions
Power supply Voltage AC 220V+22V, 50/60HzVoltage AC 220V+22V, 50/60Hz
Power 2KVA
Dimension 1060mm X 790mm X 1150 mm
Net Weight 300 Kg
Clinical Chemistry Analyser CS-400
Clinical Chemistry Analyzer CS-400

Features

Fully automated Random Access Clinical Chemistry analyser

  • Throughput of 900 tests / hour photometric tests (single/double reagent)
  • 3 stand-alone probes – one probe for sample and two probes for reagent
  • Semiconductor refrigerated double reagent discs
  • Cooled positions for calibrators and controls
  • On-board laundry – 12 steps rinsing system
  • Pipetting tube has pressure sensor which can detect and clear clot
  • Minimum reaction volume: 120 uL
  • Water degassing technology
  • Two independent flat paddle mixers
  • Reusable cuvettes
  • Rear spectrophotometry of holographic concave flat field grating
  • Syringes are made of long life high-precision ceramic piston
  • Collision protection, self-resetting probes
  • Daily and monthly QC
  • LIS interface
  • User authority hierarchical management to enhance system security
  • Optional ISE module (Throughput 1350 tests/hour with ISE)

Technical Specifications

Throughput

  • Constant throughput of 900 photometry tests per hour (1350 tests her hour with ISE)
Sample Unit
Sample positions 140 sample positions
Sample volume 1.5 - 35 μL with increments of 0.1 μL
Sampling technology Liquid level detection, liquid level tracing, clot detection and collision protection
Sample tube Standard cups, original blood tube, multi-specification tubes available
Reagent Unit
Reagent tray/positions 2 compartment, 132 reagent positions totally, with continuous refrigeration; supporting 4 kinds of reagent test functions
Reagent volume 15μL ~ 350μL
Reagent probe 2, with the function of liquid level detection, liquid level tracing and clot detection
Reaction Unit
Reaction Cuvette 160 new type reaction cuvettes
Reaction volume 120 μL ~ 450 μL
Reaction temp. 37±0.1o C
Mixing needle 2 independent mixers ensure sufficient reaction
Optical System
Light source 20W/12V halogen lamp with lifetime of more than 2000 hours
Wavelength 13 wavelengths 340nm, 380nm, 405nm, 450nm, 480nm, 505nm, 546nm, 570nm, 600nm, 660nm, 700nm, 750nm or 800 nm
Calibration & Control
Calibration Method 1 point linear method, 2 point linear method, multipoint linear method, non-linear method
Calibration tracking Automatic description calibration k-value trends
QC method real-time QC, days QC and day QC
linical Chemistry Analyzer CS-1300b

Features

Fully automated bench-top Random Access Clinical Chemistry analyser

  • Throughput up to 250 photometric tests / hour
  • Cooled reagent tray
  • On-board laundry
  • Permanent optical glass cuvettes
  • Long life and maintenance-free ceramic dilutor
  • Very low water consumption
  • Bi-directional LIS
  • Bar-coded System pack reagents from Dialab GmbH, Austria
  • Manufactured in Europe
Autolyser
Autolyzer

Technical Specifications

Analysis Mode

  • Upto 250 tests per hour
Sample Reagent Unit
Sample reagent positions 78 positions in sample tray (62 routine and stat samples, 16 calibrators and controls), 48 cooled positions reagent corousel
Sample volume 1.8 - 100 μL
Reagent volume R1: 0.8μl~300μl, R2: 0.8μl~300μl
Sample tube Primary tube with barcode option, pediatric micro-sample cups
Sample reagent probe 1, Preheated and capacitive level sensor
Sample Predilution Yes
Bottle Size 50ml + 20ml, system packs available
Reaction Unit
Reaction Cuvette 32 positions reaction tray, optical glass cuvettes
Reaction volume 180 μL ~ 400 μL
Reaction disk constant temperature Peltier system
Reaction temp. Off/30/32/370C (+ 0.20C)
Cuvette washing station Yes
Optical System
Light source 35W/12V halogen lamp with lifetime of more than 2000 hours
Photometric method Solid state
Wavelength 340nm, 380nm, 405nm, 436nm, 480nm, 510nm, 546nm, 578nm, 630nm, 700nm
Calibration & Control
Calibration Method Semi-log, line for two points, minimum squares, multipoint (upto 6 calibrators) , polynomial, cubic spline, log-logit4, log-logit5
QC method Westgard graph, Youden graph, L-J plot, Trender graph, Histogram
Operation Unit
Operation system Windows 2000, Windows XP, Windows Vista or Windows 7
Interface USB 2.0
Working Conditions
Power supply 110/230 VAC ; 50/60 Hz ; 300 watt
Dimension 51cm X 78cm X 58cm
Net Weight 120 Kg

Features

Fully automated bench-top Random Access Clinical Chemistry analyser

Autolyser-450
Clinical Chemistry Analyzer Autolyser-450
  • Throughput up to 450 photometric tests / hour
  • Optional I.S.E. module. Upto 690 tests / hour with I.S.E
  • Cooled reagent tray
  • Separate cooled calibrator and control tray
  • On-board laundry
  • Permanent optical glass cuvettes
  • Long life and maintenance-free ceramic dilutor
  • Clot and Crash detection sensors
  • Very low water consumption
  • Bi-directional LIS
  • Bar-coded System pack reagents from Dialab GmbH, Austria
  • Manufactured in Europe

Technical Specifications

Throughput

  • Upto 450 photometry tests per hour (690 tests per hour with ISE)
Sample Reagent Unit
Sample reagent positions 80 positions cooled for reagents, 100 positions for samples, calibrator and control trays 26 positions cooled
Sample volume 1.5 - 100μL
Sampling technology Liquid level detection, clot detection and collision protection
Sample tube Standard cups, original blood tube, multi-specification tubes available
Sample reagent probe 3, one sample arm and 2 reagent armswith function of liquid level detection and collision protection
Sample pre-dilution Yes
Reagent bottles System packs available
Reaction Unit
Reaction Cuvette 84 position optical glass cuvettes, heated
Reaction volume 180 μL ~ 400 μL
Reaction disk constant temperature Peltier controlled
Reaction temp. Off/30/32/370C (+ 0.20C)
Mixing needle 1, after joining reagent, blending immediately
Cuvette washing station Yes
Optical System
Light source Tungsten halogen lamp with dichroic reflector with lamp life more than 2000 hrs
Photometric method Solid state
Wavelength 340nm, 380nm, 405nm, 436nm, 480nm, 510nm, 546nm, 578nm, 600nm, 660nm, 700nm, 740nm & 800 nm
Absorbance range 0~3.0Abs
Calibration & Control
Calibration Method Factor, linear, with curve, multipoints, cubic spline, log-logit4, log-logit5, semi-log, polynomial, best fit
Calibrator Predilution Yes
Operation Unit
Operation system Windows XP
Interface USB port, RS232, port, LAN port
Working Conditions
Power supply 100/240 VAC; 50/60 Hz; 400 watt
U.P.S 1500 watt
Dimension 1150mm X 1150mm X 720mm (H x W x D)
Net Weight 162 Kg
Gross Weight 237 Kg